Popup QML Type

This property holds whether the popup has active focus.

See also focus and Keyboard Focus in Qt Quick.

Anchors provide a way to position an item by specifying its relationship with other items.

A common use case is to center a popup within its parent. One way to do this is with the x and y properties. Anchors offer a more convenient approach:

 Pane {
     // ...

     Popup {
         anchors.centerIn: parent
     }
 }

It is also possible to center the popup in the window by using Overlay:

 ApplicationWindow {
     id: window
     // ...

     Pane {
         // ...

         Popup {
             anchors.centerIn: Overlay.overlay
         }
     }
 }

This makes it easy to center a popup in the window from any component.

Note: Popups can only be centered within their immediate parent or the window overlay; trying to center in other items will produce a warning.

This property was introduced in QtQuick.Controls 2.5 (Qt 5.12).

See also Popup Positioning, anchors, and Using Qt Quick Controls types in property declarations.

This property holds the height available to the contentItem after deducting vertical padding from the height of the popup.

See also padding, topPadding, and bottomPadding.

This property holds the width available to the contentItem after deducting horizontal padding from the width of the popup.

See also padding, leftPadding, and rightPadding.

This property holds the background item.

Note: If the background item has no explicit size specified, it automatically follows the popup's size. In most cases, there is no need to specify width or height for a background item.

Note: Most popups use the implicit size of the background item to calculate the implicit size of the popup itself. If you replace the background item with a custom one, you should also consider providing a sensible implicit size for it (unless it is an item like Image which has its own implicit size).

See also Customizing Popup.

This property holds the bottom inset for the background.

This property was introduced in QtQuick.Controls 2.5 (Qt 5.12).

See also Popup Layout and topInset.

This property holds the distance between the bottom edge of the popup and the bottom edge of its window.

A popup with a negative bottom margin is not pushed within the bottom edge of the enclosing window. The default value is -1.

See also margins, topMargin, and Popup Layout.

This property holds the bottom padding. Unless explicitly set, the value is equal to verticalPadding.

The padding properties are used to control the geometry of the content item.

Popup uses the same approach to padding as Control. For a visual explanation of the padding system, see the Control Layout section of the documentation.

See also padding, topPadding, verticalPadding, and availableHeight.

This property holds whether clipping is enabled. The default value is false.

This property determines the circumstances under which the popup closes. The flags can be combined to allow several ways of closing the popup.

The available values are:

The default value is Popup.CloseOnEscape | Popup.CloseOnPressOutside.

Note: There is a known limitation that the Popup.CloseOnReleaseOutside and Popup.CloseOnReleaseOutsideParent policies only work with modal popups.

This property holds the list of content children.

The list contains all items that have been declared in QML as children of the popup.

Note: Unlike contentData, contentChildren does not include non-visual QML objects.

See also Item::children and contentData.

This property holds the list of content data.

The list contains all objects that have been declared in QML as children of the popup.

Note: Unlike contentChildren, contentData does include non-visual QML objects.

See also Item::data and contentChildren.

This property holds the content height. It is used for calculating the total implicit height of the Popup.

For more information, see Popup Sizing.

See also contentWidth.

This property holds the content item of the popup.

The content item is the visual implementation of the popup. When the popup is made visible, the content item is automatically reparented to the overlay item.

Note: The content item is automatically resized to fit within the padding of the popup.

Note: Most popups use the implicit size of the content item to calculate the implicit size of the popup itself. If you replace the content item with a custom one, you should also consider providing a sensible implicit size for it (unless it is an item like Text which has its own implicit size).

See also Customizing Popup.

This property holds the content width. It is used for calculating the total implicit width of the Popup.

For more information, see Popup Sizing.

See also contentHeight.

This property holds whether the popup dims the background.

Unless explicitly set, this property follows the value of modal. To return to the default value, set this property to undefined.

See also modal and Overlay.modeless.

This property holds whether the popup is enabled. The default value is true.

This property was introduced in QtQuick.Controls 2.3 (Qt 5.10).

See also visible and Item::enabled.

This property holds the transition that is applied to the popup item when the popup is opened and enters the screen.

The following example animates the opacity of the popup when it enters the screen:

 Popup {
     enter: Transition {
         NumberAnimation { property: "opacity"; from: 0.0; to: 1.0 }
     }
 }

See also exit.

This property holds the transition that is applied to the popup item when the popup is closed and exits the screen.

The following example animates the opacity of the popup when it exits the screen:

 Popup {
     exit: Transition {
         NumberAnimation { property: "opacity"; from: 1.0; to: 0.0 }
     }
 }

See also enter.

This property holds whether the popup wants focus.

When the popup actually receives focus, activeFocus will be true. For more information, see Keyboard Focus in Qt Quick.

The default value is false.

See also activeFocus.

This property holds the font currently set for the popup.

Popup propagates explicit font properties to its children. If you change a specific property on a popup's font, that property propagates to all of the popup's children, overriding any system defaults for that property.

 Popup {
     font.family: "Courier"

     Column {
         Label {
             text: qsTr("This will use Courier...")
         }

         Switch {
             text: qsTr("... and so will this")
         }
     }
 }

See also Control::font and ApplicationWindow::font.

This property holds the height of the popup.

This property holds the horizontal padding. Unless explicitly set, the value is equal to padding.

The padding properties are used to control the geometry of the content item.

Popup uses the same approach to padding as Control. For a visual explanation of the padding system, see the Control Layout section of the documentation.

This property was introduced in QtQuick.Controls 2.5 (Qt 5.12).

See also padding, leftPadding, rightPadding, and verticalPadding.

This property holds the implicit background height.

The value is equal to background ? background.implicitHeight : 0.

This property was introduced in QtQuick.Controls 2.5 (Qt 5.12).

See also implicitBackgroundWidth and implicitContentHeight.

This property holds the implicit background width.

The value is equal to background ? background.implicitWidth : 0.

This property was introduced in QtQuick.Controls 2.5 (Qt 5.12).

See also implicitBackgroundHeight and implicitContentWidth.

This property holds the implicit content height.

The value is calculated based on the content children.

This property was introduced in QtQuick.Controls 2.5 (Qt 5.12).

See also implicitContentWidth and implicitBackgroundHeight.

This property holds the implicit content width.

The value is calculated based on the content children.

This property was introduced in QtQuick.Controls 2.5 (Qt 5.12).

See also implicitContentHeight and implicitBackgroundWidth.

This property holds the implicit height of the popup.

This property holds the implicit width of the popup.

This property holds the left inset for the background.

This property was introduced in QtQuick.Controls 2.5 (Qt 5.12).

See also Popup Layout and rightInset.

This property holds the distance between the left edge of the popup and the left edge of its window.

A popup with a negative left margin is not pushed within the left edge of the enclosing window. The default value is -1.

See also margins, rightMargin, and Popup Layout.

This property holds the left padding. Unless explicitly set, the value is equal to horizontalPadding.

The padding properties are used to control the geometry of the content item.

Popup uses the same approach to padding as Control. For a visual explanation of the padding system, see the Control Layout section of the documentation.

See also padding, rightPadding, horizontalPadding, and availableWidth.

This property holds the locale of the popup.

See also mirrored and LayoutMirroring.

This property holds the distance between the edges of the popup and the edges of its window.

A popup with negative margins is not pushed within the bounds of the enclosing window. The default value is -1.

See also topMargin, leftMargin, rightMargin, bottomMargin, and Popup Layout.

This property holds whether the popup is mirrored.

This property is provided for convenience. A popup is considered mirrored when its visual layout direction is right-to-left; that is, when using a right-to-left locale.

This property was introduced in QtQuick.Controls 2.3 (Qt 5.10).

See also locale and Right-to-left User Interfaces.

This property holds whether the popup is modal.

Modal popups often have a distinctive background dimming effect defined in Overlay.modal, and do not allow press or release events through to items beneath them. For example, if the user accidentally clicks outside of a popup, any item beneath that popup at the location of the click will not receive the event.

On desktop platforms, it is common for modal popups to be closed only when the escape key is pressed. To achieve this behavior, set closePolicy to Popup.CloseOnEscape. By default, closePolicy is set to Popup.CloseOnEscape | Popup.CloseOnPressOutside, which means that clicking outside of a modal popup will close it.

The default value is false.

See also dim.

This property holds the opacity of the popup. Opacity is specified as a number between 0.0 (fully transparent) and 1.0 (fully opaque). The default value is 1.0.

See also visible.

This property holds whether the popup is fully open. The popup is considered opened when it's visible and neither the enter nor exit transitions are running.

This property was introduced in QtQuick.Controls 2.3 (Qt 5.10).

See also open(), close(), and visible.

This property holds the default padding.

The padding properties are used to control the geometry of the content item.

Popup uses the same approach to padding as Control. For a visual explanation of the padding system, see the Control Layout section of the documentation.

See also availableWidth, availableHeight, topPadding, leftPadding, rightPadding, and bottomPadding.

This property holds the palette currently set for the popup.

Popup propagates explicit palette properties to its children. If you change a specific property on a popup's palette, that property propagates to all of the popup's children, overriding any system defaults for that property.

 Popup {
     palette.text: "red"

     Column {
         Label {
             text: qsTr("This will use red color...")
         }

         Switch {
             text: qsTr("... and so will this")
         }
     }
 }

This property was introduced in QtQuick.Controls 2.3 (Qt 5.10).

See also Item::palette, Window::palette, ColorGroup, and Palette.

This property holds the parent item.

This property holds the right inset for the background.

This property was introduced in QtQuick.Controls 2.5 (Qt 5.12).

See also Popup Layout and leftInset.

This property holds the distance between the right edge of the popup and the right edge of its window.

A popup with a negative right margin is not pushed within the right edge of the enclosing window. The default value is -1.

See also margins, leftMargin, and Popup Layout.

This property holds the right padding. Unless explicitly set, the value is equal to horizontalPadding.

The padding properties are used to control the geometry of the content item.

Popup uses the same approach to padding as Control. For a visual explanation of the padding system, see the Control Layout section of the documentation.

See also padding, leftPadding, horizontalPadding, and availableWidth.

This property holds the scale factor of the popup. The default value is 1.0.

A scale of less than 1.0 causes the popup to be rendered at a smaller size, and a scale greater than 1.0 renders the popup at a larger size. Negative scales are not supported.

This property holds the spacing.

Spacing is useful for popups that have multiple or repetitive building blocks. For example, some styles use spacing to determine the distance between the header, content, and footer of Dialog. Spacing is not enforced by Popup, so each style may interpret it differently, and some may ignore it altogether.

This property was introduced in QtQuick.Controls 2.1 (Qt 5.8).

This property holds the top inset for the background.

This property was introduced in QtQuick.Controls 2.5 (Qt 5.12).

See also Popup Layout and bottomInset.

This property holds the distance between the top edge of the popup and the top edge of its window.

A popup with a negative top margin is not pushed within the top edge of the enclosing window. The default value is -1.

See also margins, bottomMargin, and Popup Layout.

This property holds the top padding. Unless explicitly set, the value is equal to verticalPadding.

The padding properties are used to control the geometry of the content item.

Popup uses the same approach to padding as Control. For a visual explanation of the padding system, see the Control Layout section of the documentation.

See also padding, bottomPadding, verticalPadding, and availableHeight.

This property holds the origin point for transformations in enter and exit transitions.

Nine transform origins are available, as shown in the image below. The default transform origin is Popup.Center.

See also enter, exit, and Item::transformOrigin.

This property holds the vertical padding. Unless explicitly set, the value is equal to padding.

The padding properties are used to control the geometry of the content item.

Popup uses the same approach to padding as Control. For a visual explanation of the padding system, see the Control Layout section of the documentation.

This property was introduced in QtQuick.Controls 2.5 (Qt 5.12).

See also padding, topPadding, bottomPadding, and horizontalPadding.

This property holds whether the popup is visible. The default value is false.

See also open(), close(), and opened.

This property holds the width of the popup.

This property holds the x-coordinate of the popup.

See also y and z.

This property holds the y-coordinate of the popup.

See also x and z.

This property holds the z-value of the popup. Z-value determines the stacking order of popups.

If two visible popups have the same z-value, the last one that was opened will be on top.

The default z-value is 0.

See also x and y.

This signal is emitted when the popup is about to hide.

Note: The corresponding handler is onAboutToHide.

See also closed().

This signal is emitted when the popup is about to show.

Note: The corresponding handler is onAboutToShow.

See also opened().

This signal is emitted when the popup is closed.

Note: The corresponding handler is onClosed.

See also aboutToHide().

This signal is emitted when the popup is opened.

Note: The corresponding handler is onOpened.

See also aboutToShow().

Closes the popup.

See also visible.

Forces active focus on the popup with the given reason.

This method sets focus on the popup and ensures that all ancestor FocusScope objects in the object hierarchy are also given focus.

See also activeFocus and Qt::FocusReason.

Opens the popup.

See also visible.